Complete Installation Guide for HVAC Control System

An HVAC system is basically a high velocity, small duct, cooling and heating system that is specifically designed to fit in buildings and structures with architectural limitations and space constraints. There are many home builders and designers that make the choice of these systems as they do not need to design unique structures for hiding the cooling and heating system components. HVAC stands for Heating, Ventilation and Air Conditioning and this device require a control system for regulating its operation. An industrial HVAC control system generally features a kind of sensing device that is used for comparing the actual state and the target state. The system then comes to the conclusion on what actions need to be taken.

The Installation of an Industrial HVAC Control System

Although the installation of an industrial HVAC control system is a straightforward procedure but this does not mean that it is a DIY task. It is a task that is best left to professionals. Majority of the HVAC control systems consist of three important components and they are an outdoor unit, indoor unit and a controller. The technicians simply mount these systems, connect the lines and make some electrical connections. The complete installation guide for an HVAC control system has been provided below:
  • The first step involves calculating the load so that the system is properly sized for the structure.
  • The next step would be considering the location of the unit. The unit can be located in a space that is unconditioned. Areas like the garage, the attic or the crawl space are perfect locations for HVAC control systems. Almost any corner of an undertaking is perfect location for an HVAC control system as long as it is protected from harsh weather.
  • It is important to choose the specific location for return air duct. The return air duct should never be installed in the living room, kitchen or the dining room. However, it is also important to note that the return air duct should not be installed unless the installation of the entire HVAC system is complete. This is because you might need this duct for the transfer of materials during the installation procedure.
  • You need to construct a very simple podium depending on the size of the HVAC control system. It is also important to use the provided isolation strips with the unit for best performance.
  • Next, you need to make arrangements for the connection of the condensate drain trap. Avoid connecting the condensate line to a drain system that is closed. It is also important for you to use a kind of secondary drain pan when using overhead systems.
  • Once you are done with the process of connecting the refrigerant lines, you will complete the installation of your industrial HVAC control system.
By making use of an HVAC control system, you will be saving energy which will further help in coming up with a greener environment. The only thing that you need to do is consult an HVAC firm if you want to have a healthier life and cleaner air.

No comments:

Powered by Blogger.